LM50C and LM50-Q1 is a Temperature sensor IC manufactured by Texas Instruments. This section describes the LM50C and LM50-Q1 component specifications, component software interface specifications, OSS-EC specifications, and Test specifications & result. Also, OSS-EC program and documentations downloads:
Components specifications
This section describes the LM50C and LM50-Q1 component specifications.
| Manufacturer name | Texas Instruments | |
| Category1 | Sensor | |
| Category2 | － | |
| Category3 | A/D converter | |
| Components Classification | Temperature sensor | |
| Model Number | LM50C, LM50-Q1 | Datasheet |
Overview
The LM50 and LM50-Q1 devices are precision integrated-circuit temperature sensors that can sense a –40°C to 125°C temperature range using a single positive supply. The output voltage of the device is linearly proportional to temperature (10 mV/°C) and has a DC offset of 500 mV. The offset allows reading negative temperatures without the need for a negative supply. The ideal output voltage of the LM50 or LM50-Q1 ranges from 100 mV to 1.75 V for a –40°C to 125°C temperature range. The LM50 and LM50-Q1 do not require any external calibration or trimming to provide accuracies of ±3°C at room temperature and ±4°C over the full –40°C to 125°C temperature range. Trimming and calibration of the LM50 and LM50-Q1 at the wafer level assure low cost and high accuracy. The linear output, 500 mV offset, and factory calibration of the LM50 and LM50-Q1 simplify the circuitry requirements in a single supply environment where reading negative temperatures is necessary. Because the quiescent current of the LM50 and LM50-Q1 is less than 130 µA, self-heating is limited to a very low 0.2°C in still air.
Features
- LM50-Q1 is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow
- Calibrated Directly in Degrees Celsius(Centigrade)
- Linear + 10 mV/°C Scale Factor
- ±2°C Accuracy Specified at 25°C
- Specified for Full –40° to 125°C Range
- Suitable for Remote Applications
- Low Cost Due to Wafer-Level Trimming
- Operates From 4.5 V to 10 V
- Less Than 130-µA Current Drain
- Low Self-Heating: Less Than 0.2°C in Still A
- Nonlinearity Less Than 0.8°C Over Temp
Application
- Automotive
- Computers
- Disk Drives
- Battery Management
- FAX Machines
- Printers
- Portable Medical Instruments
- HVAC
- Power Supply Modules
Component software interface specifications
Test specifications & result
OSS-EC program and documentations download
OSS-EC program and documentations downloads can be found in the table below.
| OSS-EC specifications | OS | Calculation | Filter | Diagnosis & Failsafe | Download |
|---|---|---|---|---|---|
| New 00000057 Arduino Library | HAL:Arduino OS:Free-RTOS | floating-point | Select – Non – SMA – EMA – WMA | Physical value Min to Max | TI_LM50C_LM50-Q1_00000057 [Download not found] |
| New 00000058 Mbed | HAL:Mbed OS:Mbed | floating-point | Select – Non – SMA – EMA – WMA | Physical value Min to Max | TI_LM50C_LM50-Q1_00000058 [Download not found] |
| Arduino Library | HAL:Arduino OS:Free-RTOS | integer | Select – Non – SMA – EMA – WMA | Physical value Min to Max | Release soon |
| Mbed | HAL:Mbed OS:Mbed | integer | Select – Non – SMA – EMA – WMA | Physical value Min to Max | Release soon |
| AUTOSAR | HAL:M-CAL OS:OSEK | floating-point | Select – Non – SMA – EMA – WMA | Physical value Min to Max | Release soon |
| AUTOSAR | HAL:M-CAL OS:OSEK | integer | Select – Non – SMA – EMA – WMA | Physical value Min to Max | Release soon |
